| Norton Gear Identification 1935 - 49 | ||
| Peter Roydhouse Roadholder No. 136 - Nov/Dec 1987 |
| Details of early gearbox components |
| Difficulty is often experienced when reassembling
gearbox internals where AMC gears or occasionally Sturmey Archer 4 speed
components have been intermingled. All the components are visually
almost identical. |
||
|
Detailed examination will reveal that the AMC gears
have a different tooth and form and on some gears a different
arrangement of dogs. The AMC shaft splines are identical with earlier
items, but normally the AMC gears do not have any numbers stamped into
them. Sturmey 4 speed gears are identical with the Norton gears and only
the numbers stamped into them differentiate their origins. |
|
| The basic guide is that Norton gears carry an eight thousand number prefixed by the letter "N"; the Sturmey gears carry the prefix "EIV" followed by a number. Both types of gears are stamped with the number of teeth. | ||
The following tables show the major numbered items in upright Norton and 4 speed Sturmey boxes. The gears in the "laid down box" are the same, with the exception of the main axle which is shorter.
| NORTON GEARBOX | ||||||
| STANDARD | Teeth | CLOSE | Teeth | WIDE | Teeth | |
| Gearbox Shell 1935 to 1945 | N8001E | N8001E | N8001E | |||
| Gearbox Shell 1945 to 1949 | N8001 | N8001 | N8001 | |||
| Gearbox Shell 1949 to 1956 | GT 100 VAF | GT 100 VAF | GT 100 VAF | |||
| Main Axle | N8034 | 24 | N8032 | 23 | N 8047 | 25 |
| Layshaft Pinion | N8035 | 18 | N8033 | 19 | N8048 | 17 |
| Mainshaft Sliding Pinion | N8036 | 22 | N8036 | 22 | N8162 | 21 |
| Layshaft Free Pinion | N8037 | 20 | N8037 | 20 | N8163 | 21 |
| Mainshaft Free Pinion | N8040 | 18 | N8038 | 20 | N8160 | 16 |
| Layshaft Sliding Pinion | N8041 | 24 | N8039 | 22 | N8161 | 26 |
| Mainshaft Pinion | N8044 | 13 | N8042 | 14 | N8164 | 12 |
| Kickstart Pinion | N8045 | 29 | N8043 | 27 | N8049 | 30 |
| Racing Mainshaft Pinion | N8107 | 17 | ||||
| Racing Layshaft Lowgear | 25 | |||||
| STURMEY-ARCHER GEARBOX | ||
| STANDARD | Teeth | |
| Gearbox Shell | EIV 130 | |
| End Cover (footchange) | EIV 131A | |
| Camplate Quadrant Lever | EIV 134A | |
| Main Axle | EIV 401 | 24 |
| Layshaft Pinion | EIV 30A | 18 |
| Mainshaft Sliding Pinion | EIV 6 | 22 |
| Layshaft Free Pinion | EIV 10 | 20 |
| Mainshaft Free Pinion | EIV 90A | 18 |
| Layshaft Sliding Pinion | EIV 91 | 24 |
| Mainshaft Pinion | EIV 8B | 13 |
| Kickstart Pinion | LS 407C | 29 |
| Kickstart Axle | LS 502 | |
|
© Norton Owners Club 1987 & 1996 |
|||